CONFIGURING DIFFERENT TYPES OF IP PHONES.
THREE TYPES OF PHONES : IP, SOFT AND ANALOG.
2- Configuration steps for the three types of phones : The table below shows the instructions needed to configure
a network phones. All instructions are executed in the router configuration mode or Router(config)#.
| Instructions |
| ephone 1 |
| mac-address (mac address of the IP phone) |
| type 7960 (Cisco's IP phone model used in this example.) |
| button 1:1 |
| ephone 2 |
| mac-address (mac address of the PC's network card.) |
| type CIPC (Cisco IP Communicator or the soft-phone) |
| button 1:2 |
| ephone 3 |
| mac-address (mac address of the ATA adapter.) |
| type ATA (Analog Telephone Adapter : A/D and D/A converter.) |
| button 1:3 |